User guide

3-28 Encore Multi-port DSU/CSU User GuideÑJuly, 1997
3
a. Enter 1 for timeslot 1 and press Return when the system prompts for
the start timeslot.
b. Press 1 and Return when the system prompts for the end timeslot.
c. Press y to conÞrm the change.
appears.
Timeslot 1 in Menu-6 is allocated to port 1.
Repeat this procedure to allocate each timeslot individually to the assigned ports.
ConÞguring for SNMP
The four Multi-port Encore DSU/CSUs have a full embedded SNMP agent based on
SNMP v1, supporting RFC 1406, MIB II, and Enterprise MIB.
To enable SNMP management capability, you need to conÞgure the Multi-port
DSU/CSU in Menu-0 SNMP ConÞg.
Table 3-9 Network Time Slot Map
123456 7 8 910 1112
Local D01 --- D01 --- D01 --- D01 --- D01 --- D02 ---
13 14 15 16 17 18 19 20 21 22 23 24
Local D02 --- D02 --- D02 --- AUX --- AUX --- AUX ---
DATA01 TS01-TS01