User guide

3-26 Encore Multi-port DSU/CSU User GuideÑJuly, 1997
3
3. To allocate the start and end timeslots for port 1:
a. Enter 11 and press Return when the system prompts for the start
timeslot.
b. Enter 17 and press Return when the system prompts for the end
timeslot.
c. Press y to conÞrm when the system asks:
Do you really want to change the configuration?
d. Press y again to conÞrm when the system asks:
Some timeslots are already assigned to other ports. Proceed. (Y
or N):
appears in Allocate by Port.
4. Select the AUX port:
a. Move to Allocate by Port using an Arrow key and press Return to
activate edit mode.
b. Use an Arrow key to cycle to AUX and press Return when prompted by
the system.
AUX IDLE -IDLE appears in Allocate by Port.
5. Allocate the start and end timeslots for the AUX port:
a. Enter 19 and press Return when the system prompts for the start
timeslot.
b. Enter 23 and press Return when the system prompts for the end
timeslot.
c. Press y to conÞrm when the system asks:
Do you really want to change the configuration?
d. Press y again to conÞrm when the system asks:
Some timeslots are already assigned to other ports. Proceed. (Y
or N):
DATA02 TS11-TS17 256 Kb/s