User guide

3-24 Encore Multi-port DSU/CSU User GuideÑJuly, 1997

¥ Enter 2 for port 2 and press Return when prompted by the system.

DATA02 IDLE -IDLE appears in Allocate by Port.

2. Allocate the start and end timeslots for port 2:

¥ Enter 9 when the system prompts for the start timeslot and press Return.

¥ Enter 20 when the system prompts for the end timeslot and press Return.

¥ Press y to conÞrm when the system prompts:

¥ Do you really want to change the conÞguration?

¥ Press y again to conÞrm when the system prompts:

Some timeslots are already assigned to other ports. Proceed. (Y

or N):

appears in Allocate by Port.

Network Time Slot Map shows slots 1 through 8 allocated to port 1, slots

10 through 20 to port 2 and slots 21 through 24 to port 1.

3. Select the AUX port:

¥ Move to Allocate by Port using an Arrow key and press Return to activate

edit mode.

¥ Use an Arrow key to cycle to AUX (or enter a) and press Return when

prompted by the system.

AUX IDLE -IDLE appears in Allocate by Port.

4. Allocate the start and end timeslots for port 2:

¥ Enter 21 and press Return when the system prompts for the start timeslot.

¥ Enter 24 and press Return when the system prompts for the end timeslot.

¥ Press y to conÞrm when the system prompts:

Do you really want to change the configuration?

¥ Press y again to conÞrm when the system prompts:

Some timeslots are already assigned to other ports. Proceed. (Y

or N):

appears in Allocate by Port.

DATA02 TS11-TS24 896 Kb/s