User guide

ConÞguration 3-13
3
3. Press Return to select the Þeld.
The Þeld blinks (this is edit mode) and a prompt appears at the bottom of
the screen:
Please Enter an ID [6 characters maximum]:
4. Type the unit ID and press Return.
Use up to six alphanumeric characters; do not begin with a number. Do not
enter a blank ID. This causes the DSU/CSU to be always logged on.
Each DSU/CSU is shipped with a unique default ID, a variant of its serial
number (example: FE0086).
5. Type y to conÞrm your action when the system prompts:
Do you really want to change the Configuration [Y/N]?
To set the date and time, use a similar procedure:
1. Move to the date or time Þeld using an Arrows key and press Return to
select the Þeld.
2. Enter the date or time as indicated by the prompt and press Return.
Example: 4/8/96 yields 4/08/96 and 22:6:7 yields 22:06:07 (The clock is a
24-hour clock.)
3. Type y to conÞrm when prompted by the system:
Do you really want to change the Configuration [Y/N]?
NOTE: The software and hardware revision numbers are read-only.