User guide

3-10 Encore Multi-port DSU/CSU User GuideÑJuly, 1997
3
Do not try to log on from a Telnet session when the DSU/CSU is in dial-up mode. Use
a terminal or a terminal emulation program instead to log on directly to the DSU/CSU.
Using the Terminal Interface to ConÞgure a DSU/CSU
To fully conÞgure a Multi-port Encore DSU/CSU, set the parameters in the speciÞed
menus (refer to Table 3-2).
To select a menu, press the menu number (as indicated at the bottom of the screen).
To redraw or refresh the screen, press Ctrl-L.
NOTE: Telnet sessions to multiple DSU/CSUs on a multi-drop line will result in
intermittent delays to each Telnet session.
Table 3-2 Encore Multi-port DSU/CSU Menu Parameters
Parameter Menu
Unit ID, Date, Time, AUX port Menu-4 Main ConÞguration and T1
network parameters
Data port parameters Menu-5 Data Port ConÞguration
Timeslot allocations Menu-6 Timeslot ConÞguration
SNMP parameters Menu-0 SNMP ConÞg
Alarm conditions and thresholds,
passwords and phone numbers
Menu-7 Alarm I and Menu-8 Alarm II