User guide

3-8 Encore Multi-port DSU/CSU User GuideÑJuly, 1997
3
Log On from a Terminal
The superuser always has access to the DSU/CSU, and disconnects a user that is
currently logged on to that DSU/CSU.
To log on from a terminal (when no other user is logged on):
1. Press Ctrl-x, type the unit ID, and press Return.
If the DSU/CSU is password protected and no other user is logged on, you
are prompted with a message similar to:
Current Unit ID is MAUI.
Now you need a password to log in:
2. Type in the password, and press Return.
Menu-1 Main Status appears. If there is no response, you may have an
incorrect ID or a bad Comm Port connection.
Log On Through Telnet
To log on with Telnet when no other user is logged on:
1. Enter the telnet command and the IP address for the DSU/CSU.
If the DSU/CSU is password protected and no other user is logged on, you
are prompted with a message similar to:
Current Unit ID is MAUI.
Now you need a password to log in:
2. Enter the Normal User or superuser password.