User guide

2-4 Encore Multi-port DSU/CSU User GuideÑJuly, 1997
2
Installation
The Multi-port Encore DSU/CSU installs on a ßat surface or mount in a 19" or 23" rack.
Flat Surface Installation
To install a DSU/CSU on a ßat surface:
1. Remove the ears attached to the DSU/CSU.
2. Remove the covering from the stick-on rubber feet and stick the feet to
the bottom of the DSU/CSU.
3. Place the DSU/CSU on a ßat, stable surface.
You can stack other units on top of the DSU/CSU.
Rack Mount
The DSU/CSU can mount on a 19Ó or 23Ó rack.
To mount a DSU/CSU on a rack:
Attach the DSU/CSUÕs ears to the 19" rack, as shown in Figure 2-1 (or in a 23Ó rack as
shown in Figure 2-2 on page 2-5).