User guide

2-1
2
Installation
2
This chapter describes the physical installation process.
The installation is the same for each Multi-port Encore DSU/CSU. When information
applies to one DSU/CSU only, the DSU/CSU is speciÞcally identiÞed.
Preparation
Before you can install the Multi-port Encore DSU/CSU, you need to:
¥ Unpack and inspect the DSU/CSU for damage that may have occurred during
shipment. Wipe the exterior with a soft cloth, if needed.
¥ Check the equipment provided with the DSU/CSUÑmounting ears attached to the
DSU/CSU for rack mounting, an AC power cord and wall mount AC adaptor with
the VX Encore.
¥ Save all enclosed packing slips and documents. Save shipping cartons and packing
materials until the DSU/CSU is installed and its operation veriÞed.
¥ Prepare the location and the equipment as described below.
¥ Fill out and mail the registration card.