User guide

Introduction 1-5
1
Compliancy
Compliance with: FCC Part 68, AT&T TR62411, AT&T TR54016-1989, ANSI T1.403-
1989, FCC Part 15, UL 1459, UL 1950, DOC (IC), CUL (CSA) and AT&T TR54019
Fractional T1
About the Telnet Utility
Telnet is a TCP/IP-based network application or Internet service that enables you to
log on to another node on the network and use the nodeÕs interface as though you
were directly connected to the node. The Telnet application uses TCP as the transport
protocol.
To log on a remote node using Telnet, you simply enter the telnet command followed
by the nodeÕs IP address or domain name or you use an application that executes the
command.
Example of a Network ConÞguration
Figure 1-4 on the following page shows an example of a Wide Area Network with two
VX Encores and one DL100 Encore.