User guide

I-2 Encore Multi-port DSU/CSU User GuideÑJuly, 1997
I
G
Menu-4 Main Configuration 3-15, 3-18
DA-15 connector 2-2, 2-12, 2-13, 6-15, 6-19
DACs mode
troubleshooting 6-17
daisy-chaining DSU/CSUs 3-5
data port
alarms 3-33
troubleshooting 6-21
data test set 6-15
Fireberd 6000 6-15
troubleshooting 6-21
date
configuring 3-13
DB-25 connector 2-11, 2-12
DC power
troubleshooting 6-16
DC-9 connector 2-2
DCE mode 2-11
connecting DTE cable 2-11
diagnostics
how to run a test 6-2
Loop DTE test 6-7
Loop NET test 6-8
Loop Payload test 6-9
Loop Payload test 6-1
Loop Up/Down Remote test 6-1
Multiple Loopback tests 6-10
Self Test 6-7
dial-out capability 3-33, 3-41
Digital Link FDL Protocol
Menu-4 Main Configuration 3-16
DLMS (Digital Link Management System) 3-34
DTE cable 2-2, 2-11, 2-12
troubleshooting 6-21
DTE device
troubleshooting 6-21
DTE Loopback test
troubleshooting 6-25
DTE Loopback test 6-4
DTE mode 2-11
connecting DTE cable 2-11
DTR 3-20
troubleshooting 6-21
DTR (Data Terminal Ready) 3-20, 6-21
E
EIA-530 applications
connecting DTE cable 2-11
connecting DTE cable 3-21
EIA-530 data
converting 1-1
ESF
framing format 3-15, 3-18
Menu-4 Main Configuration 3-15
troubleshooting 6-17
external alarms 3-39
F
FDL
troubleshooting 6-17
FDL connection
Menu-8 Alarm II 3-41
Fireberd
compatibility with V.35 cable 2-11
fractional T1
application 3-15
troubleshooting loopback 6-18
framing format 3-15
troubleshooting 6-19
front panel LEDs A-8
G
grounding DSU/CSU 2-10
required grounding cable 2-3
H
HDLC (High Level Data Link Control)
data port code 3-20
flag 3-17
yellow alarm 3-14
I
ID
setting unit (or card) ID 3-10, 3-11
IP address 2-3, 3-1, 3-30, 5-10
IP subnet mask 2-3, 3-1, 3-30, 5-10