User guide

Monitoring and Management 4-17
4
Event - This Þeld allows a particular type of event to be displayed (Default - 0, All).
Enter an event index or use the cursor up/down keys to scroll through all the event
options. While selecting the event, the event description text changes with the index.
The event description text is displayed under the Description column in the event
log menu.
If the Event Þeld is left blank, the Event Þlter parameter is disabled.
The event log is saved in RAM and is bounded by the available run-time memory.
When the log overßows, the oldest events are deleted to make room for the latest
events.
The event log is also available from a remote DSU/CSU.
Commands are logged by the executing rather than the initiating DSU/CSU. For
example, in Menu-9 Diagnostics, if a remote test is started on a DSU/CSU, the event
will only be logged by the remote DSU/CSU.
The event log can be cleared by typing C; which ßushes the event log.
Seq. No - A string of 32-bit numbers starting from 1 to 232-1 that uniquely identiÞes a
DSU/CSU.
NOTE: Only selected Module and Events are displayed.