Assembly Instructions


1. Remove quick release pin and insert tube extension into tube handle.
When tube extension is the same height as the stretch film roll, replace quick release pin. Use the tension knob to adjust, if needed.
2. Push down and twist quarter turn knob to the left until it releases.
Slide stretch film roll over tube extension and place bottom disc on top.
In order to secure, push down and twist quarter turn knob to the right until mechanism locks.
3. Twist tension knob to the right until it comes in firm contact with slide grip handle.
Note: To remove your stretch film roll, tension knob must be released before quarter turn knob can be removed.
EP-790 Parts List
 .  . 
1 E790-05-23 Bottom Disc
2 E790-03 Quarter Turn Knob
3 E790-11 Quick Release Pin
4 E790-06 Slide Grip Handle
5 E790-04 Tension Knob
6 E790-02 Tube Extension
7 E790-01-XL Tube Handle
6
3
7
5
4
1
2
EP-790 Featured Parts
EP-790 Assembly Instructions
Wrap Stick