Service manual

86 Encore — Configuration Manual
Section 4 — Initial Encore System Setup
36. In the Enter new station name window which appears, type the name you
want to call the workstation and press
Enter/Return.
For example, you may want to name the workstation by it’s physical
location (e.g. Suite A) or it’s function (e.g. Technical Director).
37. Back in the Stations window click the Platform field and choose the type
of engine from the
Select platform of device list window, then click the
Return button.
Figure 61. Selecting the Platform of the Device
In the case of a system controller, choose Engine (VxWorks).
If you’re running everything on a PC, choose Engine (MS Windows).
38. Click the Public button in the Availability portion of the window to
make the engine and the applications it’s running available to
everyone.
39. Now click the Add app. button.
40. In the Select application(s) to add to list window which appears, select all of
the applications you want this engine to run.
In the case of a system controller, you must run the Control Panel Server
application on it. You may also want to run Router Control and Tie-Line
Manager on this engine or distribute them on other engines in your
system.
41. Once you’ve selected all of the applications you want this engine to run,
click the
Return button and the applications you’ve chosen will appear
in the Usable applications list in the top right portion of the Engines
window.
42. Click the Save button to save your changes.
43. If you want to add more workstations, repeat Step 33 through Step 42.