Service manual

84 Encore — Configuration Manual
Section 4 — Initial Encore System Setup
Figure 58. Selecting the Platform of the Device
In the case of a system controller, choose Engine (VxWorks).
If you’re running everything on a PC, choose Engine (MS Windows).
26. Click the All Areas button in the Availability portion of the window to
make the engine and the applications it’s running available in all Areas.
Note If you have more than one Area in your system, see Multiple Area Encore
Systems on page 91.
27. Now click the Add app. button beneath the Useable applications scrolling
list.
28. In the Select application(s) to add to list window which appears, select all of
the applications you want this engine to run.
In the case of a System Controller, you must run the Control Panel
Server application on it. You may also want to run Router Control and
Tie-Line Manager on this engine or distribute them on other engines in
your system.
29. Once you’ve selected all of the applications you want this engine to run,
click the
Return button and the applications you’ve chosen will appear
in the Usable applications list in the top right portion of the Engines
window.
30. Click the Save button to save your changes.
31. If you want to add more engines, repeat Step 21 throughStep 30.
32. Click the Main Menu button to return to System Manager’s main
window.
Adding Stations
Use this procedure to add workstations to your Encore environment. You
must have at least one workstation — even if it’s also the configuration PC