Service manual

Encore — Configuration Manual 83
Manual Initial System Setup (Without Default Database)
Figure 56. Engines Window
22. Click the Add button in the bottom left corner of the window.
23. When the Enter new engine IP address window (Figure 57) appears, type
the IP number of the engine you’re adding and press Enter/Return.
Figure 57. Entering the Engine IP Address.
24. In the Enter new engine name window which appears, type the name you
want to call the engine and press
Enter/Return.
For example, in the case of a System Controller (a single board com-
puter in the Encore frame), you might want to call it SysCntrl-1.
25. Back in the Engines window click the Platform field and choose the type
of engine from the
Select platform of device list window, then click the
Return button.