Service manual

Encore — Configuration Manual 43

Basic Procedures

This section describes how to:

• Logon to the OUI,

• Load an application,

• Request an application from another user, and

•Log off the OUI.

Logging onto the OUI

When you launch the OUI application on your workstation, the system dis-

plays the OUI Logon Screen. From this screen you can logon to your OUI

workstation and load the applications you want to use.

1. Click the Start button on the right of the task bar. The Logging-On User

Identity Box appears.

2. Type your User Identity (given to you by the System Administrator) into

the User ID Window; then press the

Enter/Return key or click the Enter/

Return

icon.

You can use either your workstation keyboard or the on-screen Alpha-

numeric Keypad. Type either upper or lower case characters — the ID

detector is not case-sensitive.

3. Type your password (given to you by the System Administrator); then

press the

Enter/Return key or click the Enter/Return icon.

Note Password entry is an optional feature, determined by the system configura-

tion; a password-entry window appears only if the option is chosen. The

password is case-sensitive — you must type it exactly as it was given to you

by the System Administrator.

A Welcome to Encore message is displayed, in addition to your user

information and any messages entered via the System Manager appli

cation or the System Administrator. Your User Name (or the first part

of it) appears on the

Start button. Icons that enable you to access local

OUI applications are displayed on the Task Bar.