Service manual

364 Encore — Configuration Manual
Section 8 — Additional OUI Operations
6. Click the Delete After Use indicator button to toggle it on (indicator shows
green) or off (indicator shows black).
7. Click the Archive After Use indicator button to toggle it on (indicator
shows green) or off (indicator shows black).
8. Click the Mirror button if you require this option.
9. Click one of the Audio buttons (A1, A2, A1/A2 or Mono) to select the audio
option you require.
10. Click the Use Before indicator button to toggle it on (indicator shows
green) or off (indicator shows black).
If you switch the button on, a date appears underneath. Click the date
and change it to the one you want using the Alphanumeric Keypad.
11. Click the Use After button to toggle it on (indicator shows green) or off
(indicator shows black).
If you switch the button on, a date appears underneath. Click the date
and change it to the one you want using the Alphanumeric Keypad.
12. Select the Use Captions indicator button to use any captions assigned to
the clip.
13. Select the Use Subtitles indicator button to use any subtitles that have
been assigned to the clip.
14. Click the Widescreen button to choose the widescreen picture format.
15. Click the Aspect Ratio button and select a ratio from the list offered.
16. Select the PDC indicator button to transmit this information to
Columbus with the clip.
17. Click the Clip Quality button and select the quality to be used from the list
window displayed.
18. The Daughter Clip indicator shows if the clip is a virtual clip.
Note The clip quality referred to as ‘NORMAL’ is the default, and is configured by
an engineer to a pre-determined value.
Video Transitions
The Video Transition Area handles the visual way in which the clip begins
and how the previous clip ends. The
Video Transition button shows the type
of transition and the small window to its right shows the duration.
Clicking the Video Transition button displays the Video Transition window: