Service manual

Encore — Configuration Manual 363
Local Machine Control Panel (LMCP)
the current clip if the button has been toggled on. For example, Logos1
button may be configured to display the station logo for five seconds com
-
mencing three seconds after the start of the clip. When the clip is loaded
into Columbus, the selections made in the Select Logos and GPIs window
are recognized and activated at the required points.
Clip Options
The Options button allows various attributes to be associated with the clip.
Most of these options are activated when the clip is used by Columbus for
transmission. Clicking the
Options button displays the Select Clip Options
window.
Figure 219. Typical Select Clip Options Window
Setting Clip Options in Clip Assistant
1. Click the Use Group button and select the device group from where the
clip is to be played out; e.g., a Video Disk Server or a group of VTRs.
2. Click the Loop button to toggle it on (indicator shows green) or off
(indicator shows black).
3. Click the Suppress Logos button to toggle it on (indicator shows green) or
off (indicator shows black).
4. Select the cache option you require: click the Always Cache, Never Cache or
Hold Cache indicator button.
5. Click the Pre Compile button to mark the clip with the Pre Compile flag.