Service manual

Encore — Configuration Manual 361
Local Machine Control Panel (LMCP)
The Captions window has the following three areas:
• Title Page Selection,
• Mark In / Mark Out Area, and
• Text Area.
Each clip can have up to twelve captions. Click the Up and Down Arrow icons
to scroll through the captions. The green number to the left of the arrows
indicates the number of the caption currently displayed.
The window underneath the Mark In and Mark Out buttons displays the dura-
tion of the currently selected caption. The Text Area consists of the Use Page
controls (at the top), and six text windows for the caption text.
Changing the Properties of a Caption
1. Click the Mark In window to display the Caption In-Point Keypad which
enables you to change the in-point of the caption.
Or
Click the Mark In button to change the mark-in point to the timecode
shown in the large Timecode Display window.
2. Click the Mark Out window to display the Caption Out-Point Keypad
which enables you to change the out-point of the caption.
Or
Click the Mark Out button to change the Mark Out point to the timecode
shown in the large Timecode Display window.
3. Select a number with the Use Page controls to select the corresponding
page in the Caption Generator.
4. Click any of the six Text windows to display a Keypad that enables text
to be added.
PDC Information
The PDC button allows Programme Delivery Control category information
to be associated with a clip. Each clip has two categories: a Major Category
and a Minor Category (which is a subdivision of the Major Category).
Clicking the PDC button displays the Current PDC Type window.