Service manual
360 Encore — Configuration Manual
Section 8 — Additional OUI Operations
Figure 215. Typical Clip Assistant Area
The Locations List shows all the locations where the currently loaded clip
exists. At the top of this list is the primary location for the clip; i.e., the first
location registered for the clip by the Encore system.
Note You cannot delete the primary location. No warning message window is dis-
played if you click this. If the location is secondary, a warning message
window gives the option of deleting the clip from the chosen location.
Amending the Details of a Clip
1. Click the Title button to change the name of a clip.
2. Click the TC Format button and select a timecode format from the options
displayed.
3. Click the Type button to display the Clip types list window, which
allows the type to be changed.
Note Each clip type is associated with a pre-defined set of attributes, which can be
viewed and changed by clicking the Options button (see
page 353). If the
Update Clip Options button is set On in the LMCP Ancillary Options screen,
the system changes all clip options to reflect those of the new clip type.
Captions (Capt.) Button
Clicking the Captions (Capt.) button displays the Captions window.
Figure 216. Captions Window