Service manual

Encore — Configuration Manual 357
Local Machine Control Panel (LMCP)
Type B Daughter clips are edited pieces of media, made up of a series of dif-
ferent daughter clips sourced from the same, or from different, parent clips.
If you delete or modify a parent clip, the daughter clip may be lost.
Note You can’t create Type B daughter clips on the LMCP.
Figure 212. Type B Daughter Clips
You can access the Clip Assistant from the LMCP; switch between the two
applications to use the functions that are appropriate to your work session.
The LMCP Screen with Clip Assistant Active
The Local Machine Control Panel is slightly different when Clip Assistant
is activated. The Device Selection Area is reduced to make room for a Tape
Area, and the Cue Points and Ancillary Areas are replaced with the Clip
Assistant Panel.
Figure 213. Local Machine Control Panel Showing the Clip Assistant active
Parent Clip 1 Parent Clip 2