Service manual

Encore — Configuration Manual 355
Local Machine Control Panel (LMCP)
4. Select where you want to dub the clip by clicking one of the buttons:
Device
Line
Archive
Selecting Device displays a list of all devices on the system; select one.
5. Click the Dest. button and select a Destination.
If you click the Archive button, the system automatically configures the
Destination.
a. If you select a VTR device, the Tape button appears; click the button
and select from the displayed list the tape you want to dub to.
The system automatically chooses a dubbing server and displays its
name next to the
Server button.
a. To change the server, click the Server button and select from the
displayed list.
If there are no suitable servers or if the Source and Destination are
not fully set up, the system displays “None Suitable” next to the
Server button.
6. Click the Priority button to select the degree of importance of the dub.
7. Click the Do COPY button to perform the dub and log the existence of the
clip in its new location. The system displays a message window
confirming the job number and time when the dub should take place.
Or
8. Click the Do EXPORT button to perform the dub without keeping a record
of the dubbed clip.
9. The job list at the bottom of the Dubbing Service box shows details of
all current jobs. Jobs automatically disappear from the list as they are
completed.
Deleting a Dubbing Job
1. Click the name of the clip in the job list to display the Delete Dub
window.
2. Click the YES button to delete the job.
Note Once the system executes a dub, the dubbing server cues up and routes the
different devices to copy the clip. If you use Do COPY, the system updates the
Location List to show both the old and new locations of the clip.
Clip Assistant
The Clip Assistant application is an additional feature of the Local Machine
Control Panel (LMCP). It allows you to register new tapes in the system, to