Service manual

354 Encore — Configuration Manual
Section 8 — Additional OUI Operations
material from one device to another; for example, from a Cart Machine to a
VideoDisk Server, or from disk to an archive medium.
The Dubbing button shows green if there is a Dubbing Server configured on
the Encore system. If there is no Dubbing Server, this button shows grey.
Figure 210. Dubbing Service Window
Use the Dubbing Service window to dub the clip that is loaded on the
current device or to dub any other Encore clip.
Selecting a Clip and Source
1. To dub a clip currently loaded onto an LMCP device:
In the LMCP Devices panel, select the device from which you want to
dub the clip; then set the
Use Clip button to “From Device”. Go to Step 3.
2. To dub any other clip:
Click the Clip button. Filer-Fax displays a list of clips; select one. The
system shows the new clip name on the
Clip button, and its primary
location
in the source field. The Use Clip button automatically changes to
“Local”. If you want to select a different source, click the
Source button
and select one from the displayed list.
3. If the clip is on tape, click the Group (Source) button and select the VTR
group from the displayed list.