Service manual

Encore — Configuration Manual 353
Local Machine Control Panel (LMCP)
button displays the Local Router Panel; the devices are displayed as Router
Destinations. A warning message appears if no such devices are loaded.
Options Button
1. Click the Options button to display the Options window.
2. Click the first button bar to select the option for creating daughter and
clone clips.
3. Switch on the Load virtual clip indicator if you want to activate this option.
4. Click the Size button to set the default duration of a new clip.
5. Select either the Filer Loading or List Loading option by clicking the
respective indicator buttons; an indicator shows green to highlight your
choice. (See
Filer-Fax on page 369).
6. Switch on the Update Clip Options button (so its indicator shows green), if
you want the system to update the current clip options when you
change the clip type. If you do not switch it on, the system leaves the
clip options unchanged.
7. Click the Mode button to select the routing option required; the selected
option is displayed in the button bar.
8. If you select Auto Mode, click the Dest button to display the Router
Destinations list window and select one of the available router
Destinations. The one you select is shown next to the
Dest button. If you
select Manual Mode, the
Dest button is unavailable.
9. Select Use object database if you want the LMCP to use the object database
— you need special system privileges to change this setting.
Figure 209. Clip Options Window
Dubbing Button
The LMCP provides a dubbing function that is only available if dubbing
servers (e.g., Transfer Manager) are configured on the Encore system. The
Dubbing Service acts as a central coordinator for the automatic transfer of