Service manual

346 Encore — Configuration Manual
Section 8 — Additional OUI Operations
Opening the LMCP
Click the Local Machine Control Panel icon on the Task Bar.
Clip Area
The Clip Area displays information about the current clip, and enables you
to work with clips. The information shown is
Clip Name, Duration, In Point and
Out Point.
Click the Hold Duration indicator button (to the right of the Dur Window) to
toggle it on or off. When the button shows green, the clip duration remains
constant. When the button shows black, the clip duration changes if the In/
Out-Points change.
Creating a New Clip on a Video Disk Server
1. Load a disk device into the Devices panel.
2. Click the Create button. The system displays the Clip types list window.
3. Select the type of clip you require.
4. Click the Enter/Return button.
5. The window disappears and the system displays the Filer-Fax in save
mode. You can name the clip, categorize and save it (see
Filer-Fax on
page 369 for more information).
Note If the selected device is a VTR, or if no device is selected, then the New Clip
button is displayed in place of the Create button (see
Creating a New Clip on
a VTR).
Creating a New Clip on a VTR
1. Load a VTR device into the Devices panel.
2. Click the New Clip button. The system displays the Clip types list
window.
3. Select a type for the new clip; then press the Enter/Return button.
4. The system shows the default values for the selected clip type.
Loading a Clip
1. Click the Load button. The Filer-Fax appears.
2. Highlight the clip you want to load.