Service manual

Encore — Configuration Manual 345

Local Machine Control Panel (LMCP)

The Local Machine Control Panel provides local control of the devices that

are available on the Encore Network. It also provides information on the

status of selected devices.

Note To use the LMCP you must have the proper software, and in some cases

hardware components or peripherals, properly installed and configured on

the device you wish to control. For example, to control a Grass Valley Group

Profile, you must purchase, install, and configure the optional VDRCS appli

cation. Similarly, to control a VTR you must purchase, install, and configure

the Serial Control Engine peripheral, the VSVC application, and an RS -422

serial (machine control) cable.

Figure 207. Main Screen

The LMCP Main Screen has five areas:

• Device Selection area,

• Device Control area,

•Cue Points area,

• Clip area, and

• Ancillary area.