Service manual
Encore — Configuration Manual 341
Local Router Panel (LRP)
Assigning a Salvo to a Button
1. From the LRP select options and load Config Mode.
2. Click the button to represent the Salvo.
3. Select Salvo from list and press the Return icon, or select Load new local
salvo
and select, using the Filer-Fax window displayed, in the usual
way.
4. Repeat for each Salvo you want to load.
5. Close Configuration window and LRP configuration window.
Updating Salvos
Salvos are not dynamically updated. If you change a Salvo in the router
configuration, you must update the Sharer's database manually using the
following procedure.
1. In the Router Control application, click the Config button on the Main
Menu.
2. Click the Save button in the Load Save section of the window.
3. Click the Commit Changes button in the Network section (on the left) of
the window.
4. Click the Re-Sync Comms button in the Hardware section (on the right) of
the window.
5. Click the Router button in the Hardware section (on the right) of the
window.
6. Click the Matrix button in the Hardware section (on the right) of the
window.
Other Operations for Salvos
Clicking the Execute Salvo button causes all the routes defined in the Salvo to
be connected.
Clicking the Test Salvo indicator button toggles it on (button shows green),
and off (button shows grey). When the button is green, all the routes
defined in the Salvo are connected - the routes defined in the Salvo are
returned to the previous state when the button is grey.
Clicking the Delete Salvo button deletes the selected salvo.
Clicking the Page-Down and Page-Up Arrow button scrolls down and up
through the pages of routes defined in the Salvo. If the
Arrow button is grey,
then you can scroll no further in that direction. A white
Arrow button signi-
fies that more pages exist.