Service manual

Encore — Configuration Manual 337
Local Router Panel (LRP)
Remote Control of the LRP
Another application running on the same OUI workstation may remotely
open an LRP display. When it does, the LRP behaves normally but with a
different set of router Destinations. To return to the standard LRP set-up,
click the LRP icon on the Task Bar.
Exiting the Local Router Panel
You may exit the Local Router Panel at any time by clicking the Eject icon
in the top right corner of the screen.
LRP Options
Clicking the Options button displays the LRP Options window. This window
contains two indicator buttons which can be toggled on and off by clicking
them. The indicator shows green when the button is on, and black when the
button is off.
Setting LRP options
If the Alpha Sort Lists button is on, all the list items in list windows subse-
quently displayed can be ordered alphabetically.
Selecting Expand All will expand all Router areas when a list window is
opened. Selecting
Expand Local will expand only the router Area for the cur-
rently selected Destination.
The Source alias options display the alias names as selected. This can be
either on the Keycaps or the UMD’s, neither or both.
Clicking the Config Mode button will display the LRP configuration window.
Source Aliases
The Aliases button allows you to give the Source buttons alternative names.
Naming Sources with Aliases
1. Click the Alias button, scroll down to find the Source to name.
2. Select the Source and click the Return icon.
3. Enter alias name and click return icon to action changes.
LRP Config Mode
The LRP can be configured to have the exact capabilities needed for a local
work environment. Typically, operators will use a LRP that has been pre-