Service manual

ManualsBrandsEncore Networks ManualsComputer equipmentVSR-1200

331

332

333

334

335

336

337

338

339

340

Encore — Configuration Manual 333

Local Router Panel (LRP)

The Local Router Panel mimics a traditional Multi-Destination hardware

panel.

• The basic LRP allows one of four 8-Destination screen panels to be dis-

played at any one time, with valid Sources for the specific Destinations

being displayed as pages of 32 Source buttons.

• By entering Options/Config mode, the LRP can be re-configured for

additional capabilities, including Preview, Park, Mini-Pic Sources,

Alias edit, Salvos, and Interlevel routing.

Destinations

Once the LRP has been set up, the Destination panel displays the names of

up to eight Destinations on a row of buttons. The currently selected Desti

nation is colored green.

• If the Destination is routed to a local Source, the Source bank that con-

tains that Source is displayed below with dark legends, and the current

Source is colored green.

• If the Destination is routed with a tie-line, the Source bank display

below will initially show grayed out legends and the current ultimate

Source will be colored green. Clicking on the Destination button

changes the Source bank to show the intermediate tie-lines, and the tie-

line employed will be colored yellow. If multiple tie-lines are used,

clicking repeatedly on the Destination button cycles through all the tie-

lines involved.

Sources

The Source bank is a block of thirty-two indicator buttons that display

Sources or tie-lines. The item currently routed to the selected Destination is

highlighted green or yellow, depending on the page displayed and

whether a tie-line is being used.

Destination/Source Identification

You can move the mouse pointer over a Source or Destination button to

view the full name on the help bar at the top of the screen. Any blank

Source buttons are not applicable to the currently selected Destination.

Destination/Source Navigation Controls

An OUI workstation can be configured to show up to four Destination

panels. These can be selected using the

Destination Panel Selection buttons, the

button indicator showing green to highlight your choice.