Service manual

332 Encore — Configuration Manual
Section 8 — Additional OUI Operations
Local Router Panel (LRP)
Local Router Panel Overview
The Local Router Panel (LRP) acts like an Encore control panel, and can be
used to route Sources to Destinations using your workstation. Sources and
Destinations can be configured by a System Administrator to suit the needs
and roles of specific users.
Note To use the LRP, the Sharer must be running and available to the PC running
the LRP.
Local Router Panel Screen Description
Figure 204. Typical Local Router Panel - Main Screen
Destinations
(up to 8)
Under Monitor
Display
Source Bank
(32 Sources on
each page)
Destination Panel
Selection Buttons
(4 available)
Source Page
Navigation
Breakaways
Interlevels
Options Bar