Service manual

328 Encore — Configuration Manual
Section 7 — Tie-Line Manager
The tie-line should now be able to be used by system operators.
Tie-Line Manager Assignments
Tie-Line and Machine Control Assignments can be created between
Rooms. Assignments reserve a Source to Destination routing path without
doing an actual Take. Assignment is a customized feature that does not
apply to most existing or new Encore facilities. Assignment is activated
with the
Enable Assignments button on the Tie-Line Manager System screen
(
Figure 200).
Figure 200. TLM System Screen, with Assignments Enabled
If the Assignments feature is disabled a message is displayed.