Service manual

Encore — Configuration Manual 313
Tie-Line Manager Screen Descriptions
Release Users
Select this option to and free all tie-lines. A precautionary
prompt is displayed that must be accepted before the tie-
lines will be released.
CAUTION - If “Park on Release” is active all tie-lines will
revert to their park Sources when released. If “Park on
Release” is off, the paths will not change, but any user will
be able to use a tie-line and change its Source.
Export
Tie-line configurations can now exported in .csv format as
a report only (i.e. there is no configuration import func
-
tion). The report contains:
Tie Line Information - Name, Starting Area, Ending Area,
Type (floating, reserved, fixed, assignable), Owner if
reserved (room or destination).
Rooms Information - Room Name, Area, List of Destina-
tions in Room
Load Save Load
Opens a FilerFax window allowing you to select a TLM
configuration file to load.
Save
Saves the TLM configuration from the configuration PC’s
memory to the Sharer.
Save As
Opens a window to name the current TLM configuration
file. Once a name is entered, a FilerFax window opens
that you use to save the data to the configuration PC.
Sources and
Destinations
Area
Reports the Area where Tie-Line Manager has been set up
and is running.
Sources
Displays the total number of Sources accessible by the Tie-
Line Manager.
Destinations
Displays the total number of Destinations accessible by
the Tie-Line Manager.
List Areas
Opens a window listing all the areas in the system along
with the sizes of their matrices.
List Sources
Displays a window list of all Sources in the system.
List Dests.
Displays a window listing of all Destination in the system.
Options Auto Ownership
When on, if the Tie-Line Manager learns over the network
that a route has happened which uses a tie-line, it will add
that Destination as a user of that tie-line.
Share Reserved
When on, allows another user to use a reserved tie-line if
it calls for the same Source as the reserved user.