Service manual

312 Encore — Configuration Manual
Section 7 — Tie-Line Manager
System Screen
Figure 189. Tie-Line Manager System Screen
System
Information
Build Number
Reports the build number of the application.
File Path
Displays the configuration file path for the shared data-
base.
Redundancy Mode
Displays the mirroring mode. Click the button for a list of
mirroring options:
Mirror Master, Mirror Slave, or Disabled.
IP
The IP address of the device which will mirror this TLM
is displayed and entered with this field.
State
The current operating state (Supervisor or Subordinate).
Load and Control Config Name
The name of the currently loaded configuration file.
Filing Mode
Displays the Source of the active database — Sharer or
Local. In
Sharer mode the database has been loaded from
the Sharer PC (normal operating mode). In
Local mode the
database has been loaded from the local hard drive.
Control Off-Line
Click to completely remove Tie-Line Manager from the
network. Existing tie-line routes will not be affected, but
they will not be able to be changed.