Service manual

306 Encore — Configuration Manual
Section 6 — Control Panel Configuration
Other Encore SCB serial ports (for example, those available with the
optional SIO card) also default to these values. Serial port settings can be
edited if necessary, using the Serial Parameters fields described above.
Interfacing with the RCL Server
The Sharer is required to be on-line only for the purpose of configuring the
clients. Once the clients are configured, the client can connect to the RCL
Server whether or not the Sharer is on-line.
When the Panel server starts up, it must find at least one Router on-line.
Otherwise, it will not serve any clients.
The user should make sure that the client is configured before attempting
to make the client talk to the server. If an Ethernet client attempts to connect
and if it is NOT yet configured in the RCL Server screen, the connection will
be terminated by the Server immediately. If a serial client connects to a port
which is NOT yet configured in the RCL server screen, the client will not
get any response from the Server.
RCL Client Configuration
Use the instructions provided by the Client’s manufacturer to configure the
Client to communicate with the machine on which the Control Panel Server
application is running.