Service manual

302 Encore — Configuration Manual
Section 6 — Control Panel Configuration
Figure 186. RCL Server Flags and Parameters
Client Name
Displays the name of the currently selected Client appli-
cation.
Area
Allows selection of the Area for the selected Client.
Backup MCPU
When using Ethernet, allows entry of a Mirror IP address
of a Client.
Protocol Type
Allows selection of either RCL (Router Control Language
protocol) or
NP (Native Protocol). When the default Auto
Select
setting is chosen, the Client will be recognized by
the Server regardless of which protocol it uses. With this
setting, it becomes possible for two Clients, each using a
different Protocol, to run using the same IP address.
Lvl Exclusion Set
Allows selection or editing of a Level Exclusion Set to
block Level access.
Area Exclusion Set
Allows selection or editing of an Area Exclusion Set to
block Area access.
Dst Exclusion Set
Allows selection or editing of a Destination Exclusion set
to block control of specific Destinations.
Svo Exclusion Set
Permits the blocking of specific Salvos. The AllSvos set
allows access to all Salvos, including any newly created
ones.
Src Category Set
Allows limiting access to only specific Sources. Excluded
Sources on a Client will report
<Undef> status. This can be
prevented with the
AllSrcs setting, which is recommended
for VSD Clients. See
Source Categories on page 251 for
more information.