Service manual

Encore — Configuration Manual 301
RCL Server Application
Delete
Clicking on the Delete button on the right side of the screen deletes the
selected Client, removing its data from the RCL Server configuration stored
on the Sharer PC and that SCB’s flash memory.
• For Ethernet clients, the connection will also be disconnected.
• For serial clients, the port will be closed and Encore will not respond to
any further queries sent by the client on that serial line.
Refresh All
Clicking on the Refresh All button refreshes the connection status (shown by
the green indicator beside for each client name) for all configured clients. If
you believe that one or more clients may have connected after this screen
was opened, you can click on this button to refresh the statuses.
Resync Comms
For serial clients, clicking on the Resync Comms button makes the RCL server
re-initialize communication with the selected serial client. The serial port is
closed and re-opened, to ensure that any change in the serial port parame
-
ters take effect.
This button is disabled for Ethernet clients.
Flags and Parameters
Clicking on the Flags and Parameters button opens a window with addi-
tional settings (Figure 186).