Service manual

298 Encore — Configuration Manual
Section 6 — Control Panel Configuration
Custom Button
Clicking on the Custom button brings up a menu bar with custom SMS
control panel selections.
MCO and COS Custom Panels and RIB Box
Two legacy custom GSC hardware panels (MCO and COS) and a custom
interface (RIB Box) are supported by Encore 1.7.3 and newer software.
These custom panels are not widely used and do not apply to most existing
or new Encore systems.
Under Monitor Display
Legacy SMS7000 Under Monitor Displays (UMD) are supported by Encore
systems running version 1.7.3 and newer (
Figure 184). A UMD reports the
name of the current Source displayed on its associated monitor.
Figure 184. Legacy Under Monitor Displays
UMDs are installed the same as any SMS7000 GSC panels, using looped
BNC connections.
The Encore system treats UMDs as SMS7000 Client control panels. To
convert an SMS7000 UMD to Encore system operation, type:
lcpProgram
from the Encore console, which programs the panel. The UMD can then be
configured with the Encore OUI by selecting the SMS7000/Custom/Client
option. This brings up the Client control panel screen, which is also used to
configure the UMD.
3388-9
Grass Valley
STATUS 1
IDENT
CAM 1
Series
7
000
3388-10
Grass Valley
STATUS 1 STATUS 1
IDENT
CAM 1 CAM 2
Series
7
000
3388-11
Grass Valley
IDENT
STATUS 1
CAM 1
STATUS 1
CAM 2
STATUS 1
CAM 3
Series
7
000