Service manual

288 Encore — Configuration Manual
Section 6 — Control Panel Configuration
JEP-100 Panel Configuration
The JEP-100 panel is configured using the Encore Panel Server application.
Many configuration modifications occur in real time, so changing Panel
Server settings can immediately be reflected in the operation of that panel.
The JEP-100 panel is represented with three screens. The left and right
screens are shown in
Figure 181 and Figure 182. The middle screen shows
the buttons in the center of the panel.
Clicking on the arrow buttons on the OUI screen, or using the left/right
arrow computer keyboard keys, accesses different panel screens.
Figure 181. JEP-100 Panel Server Left Configuration Screen