Service manual

Encore — Configuration Manual 281
Configuring Encore Control Panels
Figure 178. Protect Using Control Panel GPI
Once configured, the legends for these functions are displayed on the Panel
Server OUI screen as indicated in
Table 27.
Salvo Select via Control Panel GPI
A Salvo can also be executed via GPI. This feature is configured as above,
by going to Assignment mode and choosing that function for the GPI input
button, then going to Selection mode and choosing the Salvo.
Control Panel Self Configuration
The Self Configuration feature allows re-configuration of any available
Source/Destination/Salvo/Level select buttons from the control panel
itself. This feature is available on Encore BPS, KMD, and P48 panels. The
Self Config Lock flag must be OFF to activate this feature on the panel.
Table 27. GPI Protect Button Legends
GPI Protect Function
Keycap Display
Assignment Mode
Keycap Display
Selection Mode
Lock-Protect Prot Prot
Lock-Protect (non-latching) Prot NL Prot NL
Lock-Protect on Destination Selection Prot DstSel <Destination Name>
Lock-Protect on Destination Selection (non-latching) Prot NL DstSel <Destination Name>