Service manual

278 Encore — Configuration Manual
Section 6 — Control Panel Configuration
Panels with Keypads (XY, PMB, etc.)
You can also restrict name keypad searches on these types of panels.
1. Follow the Panels Without Keypads (48B, BPS, etc.) procedure on
page 276 to configure any Source and Destination buttons on that panel
in only the desired Areas.
2. In the Attributes and Flags menu, disable the Keypad Local Source flag in
order to configure the Keypad Searchable Areas attribute.
3. Select the Keypad Area(s) field. This will display a menu similar to that
shown in
Figure 176.
Figure 176.
4. In the System Areas box, select the desired Area (e.g. “StudioA”).
5. Select Add to move the selection to the Searchable Areas box.
6. If there are Areas where the panel should not be able to search, remove
them. This only affects keypad prefix/suffix entered searches for
presetting Sources and Destinations.
Note Using the prev/next button without a keypad entered prefix/suffix will access
all Sources in all Areas in Source mode and only Destinations not excluded in
Destination mode.
7. If you would like keypad-entered Source searches to only search the
controlled Destination Areas, re-enable the
Keypad Local Source flag.
Otherwise keypad-entered prefix/suffix Source names will search the
currently controlled Destination Area(s) and the Areas defined in the
“Keypad Area(s)” attribute.
8. Close the windows and select Save.