Service manual

Encore — Configuration Manual 275
Configuring Encore Control Panels
3. To retain a particular button’s function, with button Assignment active
select
No Change for the desired button (Figure 174).
Figure 174. Template No Change Button Assignment
4. This template can now be copied to multiple Control Panels of that type
with different defeat Destinations. Those Destinations will be retained,
along with the button functions that were set to
No Change.
Control Panels and Areas
Larger Encore systems may be divided into multiple Areas to allow parti-
tioning control of the system (see Multiple Area Encore Systems on page 91).
Control panels can be allowed to access all Areas of a system.
Note Tie-lines must be configured and available to route Sources in one Area to
Destinations in a different Area (see
Section 7-Tie-Line Manager).