Service manual

Encore — Configuration Manual 249
Configuring Encore Control Panels
6. After clicking on the lower right arrow button, these Destinations will
populate that Page (
Figure 151).
Figure 151. Destinations Entered Into Page
7. Click both red Save buttons to save that Page and the Page Set
containing that Page.
8. Repeat steps Step 3 through Step 7 above to define the Destinations for
all the Pages of the Page Set.
The individual Pages and the entire Page Set will be available for use by
other control panels after they have been saved.
Page Set Auto Create
Destination Page Sets and Salvo Page Sets can also be automatically cre-
ated, using the Auto Create button.
Note Control Panel Page Set configurations are applied as soon as they are
selected on the OUI Panel Server. Changes to an existing Page S et, however,
must be Saved before the changes take effect.
1. Using the Encore OUI Panel Server, select the Control Panel (PMB,
MB4, or MB8) that you wish to configure, click on
Configure Flags, and
then click on either
Dst Page Set or Svo Page Set. This example shows auto
creation of a Destination Page Set.
2. Click on the Auto Create button near the bottom of the screen. A pop-up
menu appears.