Service manual

Encore — Configuration Manual 241
Configuring Encore Control Panels
Rapid Configuration
During panel configuration, you can now assign a range of Sources or Des-
tinations to several panel buttons in left to right order at the same time.
Rapid configuration can be used to assign button Selections, but is not
available for button Assignments.
1. Open the Panel Server application, select the panel type you are
configuring, and choose
Selection.
2. Click on the left-most panel button of the range of buttons you wish to
configure.
3. In the popup, click on the folder icon of the desired Area, which opens
a list of items to choose from.
4. After opening the Area folder, click on that folder icon once more to de-
select the Area Name.
5. With the Multi button lit, select a range of items by clicking on them
individually.
6. When you click to accept, all the items you selected will be assigned to
a range of panel buttons from left to right in the order they were
selected.
Multi-Select Operations in Panel Server
Multiple selections can be made in several Panel Server screens, to speed
data entry operations.
Control Panel Multi-Button Selection
Multiple buttons on Panel Server Control Panel screens can now be
selected.
• Shift-clicking on a button turns it green, and shift-clicking another
button selects that range of buttons for configuration.
• Ctrl-clicking on a button toggles the green color on and off, allowing the
addition or removal of individual, non-contiguous buttons for configu
-
ration.
Once multiple buttons are selected, clicking on a green button opens the
normal selection lists, either Assignment or Selection (
Figure 142).