Service manual

240 Encore — Configuration Manual
Section 6 — Control Panel Configuration
b. On an existing Encore system you can select an existing template (in
the
Templates list window) or an existing configuration (in the Panels
list window).
4. Click the appropriate Edit button to load the template or configuration
file for editing. The name of the template or configuration appears in
the Config. Name field in both the Panel Template Management
window and the panel’s main window behind it.
5. Now proceed to edit your template or configuration.
a. Choose Assignment and assign the desired functions to the buttons.
b. Choose Selection and select the action desired for each button
(Sources, Destinations, Levels, Salvos, etc.). If your system has
multiple Areas you will need to first select the Area, and then the
specific item within that Area.
Note A None selection is available at the top of the scrolling list lets you to define
a button’s Assignment, but not yet define the actual Selection. Panels able to
be locally configured can use this feature to ensure Selections are defined
only on the panel.
c. On panels with KeyPads, select the Primary and Alternate KeyPad
sets to use with that panel.
d. Choose Configure Flags and set any additional features/restrictions
for your panel.
Note Changes made to an on-line control panel configuration take effect immedi-
ately on that panel. However, these changes are not persistent at this time.
The control panel will return to it’s previous configuration if you exit the Panel
Server configuration screen. You use Save to save these changes.
6. When satisfied with your template or configuration settings, click the
Save button on the Menu Bar to save your changes.
Note If you just want to abandon your changes and start all over again, you can
click the Select button on the Menu Bar, choose not to save your changes
when prompted, and reload the template or configuration.
7. If you created a template, you can now assign that template to multiple
multiple panels, to ensure they operate identically.
a. Click Select to go to the Template Management Window.
b. Choose the template in the left pane you wish to use.
c. Choose a panel in the right pane, then click Copy Template to Panel.
Alternatively, you can assign that template to multiple panels in the
right pane by clicking on
Copy Templates to Panels.