Service manual

Encore — Configuration Manual 239
Configuring Encore Control Panels
Configuring Encore Control Panels
Encore control panels can use default configurations, or they can be re-con-
figured to meet specific requirements.
Before configuring any control panels, confirm that you have configured
your Router Controller. For details and procedures, see
Section 5-Router
Configuration.
1. From the Panel Server Main screen, click the Panels button for the type
of panel (Encore, Kalypso, SMS), then click on the specific model of
control panel you wish to configure.
When the panel main window appears, all the buttons will be blank
and the
Config. Name field in the upper right corner will indicate NO
CONFIG.
2. Click the Select button on the Menu Bar to open the Panel Template
Management window (see
page 226).
3. Choose a template or configuration file to use as a starting point for that
panel.
a. On a new Encore system you will see only a Default template and a
list of all panels of the selected type connected to the system. These
panels will initially use configurations based on the Default
template (they will all have identical settings) and each
configuration will be given that panel’s name.
Note You can select a template and use the Save As button to make yourself a copy
with a name reflecting its intended distinction from the other templates. You
can then load and proceed to edit your new template.
Src Mode Time In
When enabled, automatically returns the panel to Source
Mode after the specified length of time with no button
activity. That length of time is specified in the
Src Mode
Time In
field in the left column of the Configuration Attri-
butes and Flags window. Src Mode Time In and Dst Mode Time
In
are mutually exclusive. Enabling one disables the other,
even though any existing time settings are maintained in
the disabled field.
Src Preset Lock
This feature is currently not available.
Studio Panel
Available on custom COS control panels. When OFF, the
COS panel will act as a Cubical panel.
Svo Lock
When ON, prevents scrolling and execution of Salvos
from scrolling Salvo mode access. Salvo Select operations
are not affected by this configuration flag.