Service manual

Encore — Configuration Manual 235
Panel Configuration Screen Description
Auto Tally
When ON, the panel will automatically Tally on the first
available non-excluded controllable Level for each Desti
-
nation the panel is controlling.
Backlight
Enables/disables the backlight feature for control panel
buttons.
Chop Lock
When ON, Chop operation is blocked. Turn OFF to enable
the Chop feature on that panel.
Display Alias
Names
When ON, displays the aliases defined for Sources, Desti-
nations, etc. This feature can also be assigned to a panel
button to toggle it on or off directly on the control panel.
Dst Change Lock
When ON, the configured Destinations on a panel will not
be able to be changed using Destination Select Buttons or
Destination mode on that panel. However, Destination
Page mode may still be used to change the panel's control
-
lable Destinations to the those defined in the Destination
Page Set.
Display Last
Salvo
Available on all Control Panels (except the Client, MCO,
and COS panels). When this flag is On, the Salvo select
button of the last Salvo executed by that panel will remain
illuminated.
Dest/ Ganging
Option 2
For Destination Ganging, when ON panel buttons can be
toggled on and off to add or remove them from a Gang.
See
Destination Ganging on page 267 for more informa-
tion.
Dst Mode Time In
When ON, the panel will automatically return to Destina-
tion Mode after the specified length of time with no
button activity. The time is specified in the
Dst Mode Time In
field.
Dst Mode Time In and Src Mode Time In are mutually
exclusive. Enabling one disables the other. Existing time
settings are maintained in the disabled field, however.
Flashing LED
Indication
When ON, this feature activates additional flashing panel
button prompts. Typically this is used to identify the
owner of a Destination Lock/Protect by flashing the
Protect button of the control panel that initiated the Lock/
Protect. This feature is also useful for facilities with mul
-
tiple Areas and tie-lines. When a tie-line Source is Preset,
the Take button(s) will flash to indicate the Take requires
the use of a tie-line.
Flashing Rate
This feature is operates in conjunction with the Flashing
LED Indication
flag, setting set the blink rate of the buttons.
(0.1 sec. per count, 1 to 50).