Service manual

Encore — Configuration Manual 229
Panel Configuration Screen Description
Keypad Set Conversion
Keypad Set button arrangements on control panels have two different
physical layouts:
• Four rows with 4 buttons in each row (4x4), or
• Two rows with 8 buttons in each row (2x8).
Before Encore Release 1.7 users had to create and assign keypad sets based
on this physical layout. For example, an Encore XY panel would require a
2x8 keypad set, but a PMB panel would need a separate 4x4 set, which
would have to be created separately. With Encore V1.7, any keypad set can
be assigned to any control panel type regardless of the button layout.
(KeyPad Buttons)
Shows a representation of the current KeyPad. With either
the
Prefix or Suffix button below illuminated, clicking on a
KeyPad button opens a text entry window for changing
the Prefix or Suffix text for that keypad button.
Selects whether the Prefix or Suffix text will be edited for
that named set when a KeyPad button is selected.
The scrolling window on the left allows selection of a
KeyPad set. Each KeyPad set contains a Prefix set and a
Suffix set of button legends, selectable from the two
windows on the right.
The Save, Save As, and Delete buttons are used to edit,
create, and delete KeyPad sets in that window. The
Default and Default2 KeyPad sets cannot be edited or
deleted. You can save a Default file under a new name for
editing. Also see
Exclusion, Page, Source Category, and
Keypad Set Precautions on page 256.
Show Used
Clicking on this button opens a window listing all the
control panels currently using that set (Keypad, Prefix, or
Suffix). This is useful when editing keypad sets in large
facilities with many panels.