Service manual

224 Encore — Configuration Manual
Section 6 — Control Panel Configuration
Selected Panel Button Function Descriptions
Many panel button functions are obvious. For example, pressing the
Panel Enable button enables or disables the panel (used to lock a panel so it
cannot be used). Other button functions are not as simple to understand,
however, and some of these buttons are described briefly below.
•The Dest Ganging Opt 2 button toggles a panel between two different Des-
tination Ganging operating modes. See Destination Ganging on page 267
for more information.
Panel Enable Y Y Y Y Y Y Y Y Y Y Y
Park Y Y Y Y Y Y Y Y Y Y
Preset Source Y Y Y Y Y Y
Previous Y Y Y Y Y
Previous Area Y Y
Prev Dst Y Y Y
Prev Src Y Y Y
Previous Next Knob hard
PreVu
Protect hard
Prot / Hold hard hard
Salvo Mode Y Y Y Y Y
Salvo Page Mode Y Y Y
Salvo Select Y Y Y Y Y Y Y Y Y Y Y
Shift Y Y Y Y Y Y Y Y Y Y Y
Source / Identification Y Y Y Y
Source Mode Y Y Y Y Y
Src Cat Mode Y Y Y Y Y Y Y
Src Cat Select Y Y Y Y Y Y Y
Source Select Y Y Y Y Y Y Y
Store Y Y Y
Take Y Y hard
Take All Y
Take / Load hard hard
Tally Level Y
Tally Level - ID Y
Undo Take Y Y Y Y Y Y Y Y Y Y
Up
Table 25. Assignable Buttons by Control Panel Type - SMS - (continued)
SMS
Button Function
UCP EDP P48 MB8 P32 SCP PXS PXD PXYE MB4 SVR