Service manual

Encore — Configuration Manual 169
Sample Router Configurations
Multiple Matrix Controllers and Shared Elements
This example is for two Matrix Controllers configured as a single 128 x 128
Crosspoint Group. There are two Levels (HD and SD) which share all the
crosspoints.
Figure 103. Multiple Matrix Controllers and Shared Elements
The HD and SD logical matrices share the crosspoints in the range 1 to 128.
Interlevel routing should not be enabled to ensure that the Router Con
-
troller does not switch an SD Source to an HD Destination or vice versa.
Table 22. Configuration for Multiple Matrix Controllers and Shared Elements
Crosspoint Group
Matrix Controllers
within Crosspoint
Group
Segments within Crosspoint Group Logical Matrix
Name Max Input Max Output Matrix Controllers Segments Matrix Controller I/O Channel
a
a
S = Same for both crosspoint groups; D = Different for each crosspoint group; A = Any channel.
Address
a
Outputs ID Input range Output range Type & Factor Unique Name Level Inter levels Elements
HD_Phys 128 128 2 1
1
D A
64
H 1-128 1-128 Block
No HD HD None 1
2 64 SD SD None 1
Crosspoint GroupI/O ChannelsLogical Matrices
HD
128x128 Matrix
Connector ID 1-128
One Element (shared)
Blocked Format
SD
128x128 Matrix
Connector ID 1-128
One Element (shared)
Blocked Format
164
Matrix
Controller 1
Matrix
Controller 2
128
128
1
HH