Service manual

Encore — Configuration Manual 167
Sample Router Configurations
Multiple Levels and Shared Elements
This example is for three Levels mapped onto a single Crosspoint Group.
The first Level is Audio Stereo and has two elements (Audio Left and
Right). The other two Levels both have a single element (Audio Left and
Audio Right) and share the same crosspoints.
Figure 102. Multiple Levels and Shared Elements
A Source (or Destination) Level mapped to the Audio_Stereo logical matrix
is configured with a connector in the range 1 to 32. Connectors in the range
33 to 64 are automatically used for second element. Even if all the cros
-
spoints were in the range 1 to 64, the Router Controller cannot carry out an
interLevel Take to swap audio channels within the Audio Stereo Level
(since this is a single Level).
Crosspoint GroupI/O ChannelsLogical Matrices
Audio_Left
64x64 Matrix
Connector ID 65-128
One Element (shared)
Blocked Format
Audio_Right
64x64 Matrix
Connector ID 65-128
One Element (shared)
Blocked Format
Audio_Stereo
32x32 Matrix
Connector ID 1-32
Two Elements
Blocked Format
132
32
64
64
96
96
128
128
L
R
A